Copyright @ 2000 Illinois Precision Corporation

Created by: lillyshandprint.com Websites for Everyone

Terms

1/2 with order - Balance on delivery F.O.B. BICKNELL IN.

Shipment: Approximately 10 weeks after receipt of purchase order and initial payment.

All shipping and handling charges are to be paid for by the customer

California Customers: A California Sales Tax of 7.5% shall be the customer’ responsibility

Key features

 

Vertical injection and vertical clamp with horizontal rotary table
Barber-Coleman Maco 4000 controller provides closed loop control for accuracy, repeatability and reliability.
Systemic Process Control Option
Electric driven roller gear indexer - Quick rotation (90 degrees in 1 second, 180 degrees in 2 seconds) provides high throughput
On board memory for molding recipes, additional recipes can be loaded using cassettes, or optionally, through a PC
Light curtain for operator safety
One ounce (22mm diam. screw) or two ounce (30mm diam. screw) shot capacity.

Each machine may have additional custom features added, to suit specific customer applications

 

NOTE: Specifications, as stated, are standard at this time. Illinois Precision Corporation reserves the right to make changes, without notice, at any time, to enhance system performance.

Vertical injection and vertical clamp with horizontal rotary table
Barber-Coleman Maco 4000 controller provides closed loop control for accuracy, repeatability and reliability.
Systemic Process Control Option
Electric driven roller gear indexer - Quick rotation (90 degrees in 1 second, 180 degrees in 2 seconds) provides high throughput
On board memory for molding recipes, additional recipes can be loaded using cassettes, or optionally, through a PC
Light curtain for operator safety
One ounce (22mm diam. screw) or two ounce (30mm diam. screw) shot capacity

Barrel is made of Bimetallic Nickel-Cobalt Lined

Screw is made out of D2 Bright-hardened Steel

Three piece check ring Titanium Nitride

Mold clamping force: 12 / 25 ton equivalent.

Ejector stroke: .75" max.

Hydraulic reservoir capacity: 33 gallons

Pump output: 9.5 GPM

Normal high pressure: 1,825 PSI

Normal low pressure: 700 PSI

Minimum operating pressure: 100 PSI

Maximum operating pressure: 2,500 PSI

Power requirements: 208-240 3 phase 40 Amps 60hz

Motor: 7.5 HP @ 1,750rpm 208-240/480 Volt 60hz 3 Phase

Overall dimensions (inches): 67"W x 82"L x 93.5"W

Shipping weight: 2,900 lbs.